ADTRAN - FT1 DP

Below are all the different types of ADTRAN. Select the device of your choice, to download the manual

Contents

Aduoti HDSL Quick Installation Guide for ADTRAN FT1 DP and FNID PRACTICES Three eight position switch packs SW1 2 4 and two four position switch packs SW3 5 are used to configure FT 1 DP mode of operation as listed in the table below Refer to ADTRAN Installation Maintenance practices for more information Option Settings arrows indicate default settings Switch Function Description SW1 1 Channel Select Selects between alternating and contiguous DSO channels Closed Alternate Open Contiguous SW1 2 Auto Code Detect When this switch is closed the unit automatically detects the line code as B8ZS or Closed Auto AMI Open Manual SW1 3 Manual Code Select When SW1 2 is open SW1 3 open selects B8ZS line code while SW1 3 closed Close ...